Products

Home > Products > Foam Profile Cutting Machine > Foam Bevel Cutter for PU Sponge EVA Rubber with 4000x4000mm Work Area

Catagories

Automatic Palletizer Machine

(8)

Contacts

Contacts: Mr. Kobe

Tel: 18669710820

Contact Now

Mail Us

Foam Bevel Cutter for PU Sponge EVA Rubber with 4000x4000mm Work Area

Product Details

Place of Origin: Qingdao

Brand Name: Xinmeiteng

Certification: CE

Model Number: TDA

Payment & Shipping Terms

Minimum Order Quantity: 1 Set

Price: Inquiry

Packaging Details: TO BE DETERMINED

Delivery Time: 45 working days after downpayment

Payment Terms: L/C,T/T

Supply Ability: 3 sets per season

Get Best Price

Product Details

Product Description

Highlight: 
                                                                                                                                                                                    Rubber Plastic Foam Bevel Cutting Machine, 45-90 Degree Adjustable Slope Cutter, 1800kg Stable Foam Angular Machine
                      

Cutting Angle:	45-90 Degrees	Motor Power:	1.68 KW
Machine Weight:	1800 Kg	External Size:	4000 X 4000 X 2500 Mm
Work Area:	4000 X 4000 Mm	Cutting Type:	Bevel / Slope Cutting

Cutting Angle:	45-90 Degrees
Motor Power:	1.68 KW
Machine Weight:	1800 Kg
External Size:	4000 X 4000 X 2500 Mm
Work Area:	4000 X 4000 Mm
Cutting Type:	Bevel / Slope Cutting

Foam Bevel Cutter for PU Sponge EVA Rubber with 4000x4000mm Work Area

45-90 Degree Adjustable Foam Bevel Cutter for PU Sponge EVA Rubber with 4000x4000mm Work Area

The TDA is set up for the wider group of rubber-plastic foams, with an angle range and a feed arrangement that let the operator adapt to the material rather than the other way round.

The cutting angle adjusts from 45 to 90 degrees and locks on the guide. For shoe soles and technical parts the bevel is often short and steep; for furniture foam it is long and shallow. The 4000 x 4000 mm working area gives enough room to present a long block or a large sheet at an angle without the operator fighting the frame.

Blade speed and feed are matched to the material by the operator, and the 1800 kg frame keeps the machine still when a dense EVA block is pushed through. The result is a bevel that is cut rather than torn, which matters because a torn edge on EVA or rubber foam cannot be sanded back to a clean line.

Technical Specifications

Product Category	Parameters
Product Category	Parameters
Cutting angle	45-90 degrees, adjustable
Motor power	1.68 kW
Machine weight	1800 kg
External size (L x W x H)	4000 x 4000 x 2500 mm
Material compatibility	PU sponge, EVA, rubber and other rubber-plastic foam
Cutting type	Bevel and slope cutting
Operation	Manual feed with adjustable angle guide

Machine Details

Machine in the Workspace

Why This Machine

Material range

PU sponge, EVA, rubber and other rubber-plastic foams run on the same machine with the same blade geometry.

Angle range 45-90 degrees

Short steep bevels for shoe and technical parts, long shallow tapers for furniture foam.

Large work area

4000 x 4000 mm lets a long block be presented at an angle without re-clamping.

Cut, not torn

A rigid frame and controlled feed keep the blade slicing through dense foam instead of dragging.

Stable under load

1800 kg weight holds the machine in place when a dense block is fed through.

Simple to change over

Angle and fence position are the only settings, so switching material takes minutes.

Where It Fits

Shoe and sole foam: steep short bevels on EVA and rubber foam components.
Technical foam parts: slope cuts on gaskets, seals and protective foam.
Furniture foam: long tapers on arms, backs and cushion edges.
Packaging foam: bevel trimming on shaped inserts and corner protection.

Switching Between Foam Materials

Match the angle: set the guide for the bevel the part drawing calls for.
Check the blade: confirm the edge is clean before running dense EVA or rubber foam.
Set the feed: feed dense foam slower and keep the block flat against the fence.
Inspect the edge: check the first part for tearing before releasing the batch.

Maintenance and Safe Operation

Check the angle lock before the first cut of the shift. A guide that creeps by a degree shows up as a twisted bevel over a long run.
Keep the blade edge clean and free of melted foam. Dull or coated edges tear the cell wall instead of slicing it.
Clear trim from the table between batches. Offcuts under the block tilt the work and change the bevel angle.
Isolate the machine before blade changes. The blade is exposed during the change and the motor must not be live.

Frequently Asked Questions

What angle range does the TDA cover?

A: 45 to 90 degrees, adjusted on the angle guide and locked before cutting.

Which materials can it cut?

A: PU sponge, EVA, rubber and similar rubber-plastic foam used in furniture and cushion production.

Is it a manual or automatic machine?

A: The TDA is a manual-feed bevel cutter: the operator guides the block against the angle fence, which keeps the machine simple and the footprint small.

What is the power requirement?

A: 1.68 kW, single machine motor. It runs from a standard workshop supply without a dedicated transformer.

What is the delivery time?

A: 45 working days after downpayment.

Cut Bevels Across Foam Types

Send us the foam types and bevel dimensions you run. We will confirm the TDA blade arrangement and angle range for your mix of furniture, shoe or technical foam work.

Tags:

PU Foam Cutting Machine

CNC Foam Cutting Machine

Loop Foam Cutting Machine

Foam Profile Cutting Machine

Continuous Foaming Machine

Foam Lamination Machine

Rebonded Foam Machine

Foam Recycling Machine

Foam Drilling Machine

Sponge Shredder

Foam Crusher Machine

Foam Baler

Automatic Palletizer Machine

Foam Bevel Cutter for PU Sponge EVA Rubber with 4000x4000mm Work Area

Rubber Plastic Foam Bevel Cutting Machine

45-90 Degree Adjustable Slope Cutter

1800kg Stable Foam Angular Machine

Material range

Angle range 45-90 degrees

Large work area

Cut, not torn

Stable under load

Simple to change over

Manual Foam Cutting Machine 4000mm,

650mm Foam Profile Cutting Machine,

PU Foam Cutting Machine

CNC Foam Cutting Machine

Loop Foam Cutting Machine

Foam Profile Cutting Machine

Continuous Foaming Machine

Foam Lamination Machine

Rebonded Foam Machine